Before you start: • Avoid setting the date between 21:00 and 03:00. • Unscrew the crown before you adjust anything. • Mechanical movements start when the watch moves. You can wind them by hand.
NH35. Automatic movement with date
Start and winding: • Turn the crown clockwise 20 to 30 times after you unscrew it. • The movement also winds itself when you wear the watch.
Set the time: • Pull the crown to position 2. • Move the hands forward only.
Set the date • Pull the crown to position 1. • Turn the crown counterclockwise to change the date.
NH34. Automatic movement with GMT and date
Start and winding: • Turn the crown clockwise 20 to 30 times after you unscrew it. • The movement also winds itself through motion.
Set the time: • Pull the crown to position 2. • The GMT hand follows the main hands.
Set the date and GMT: • Pull the crown to position 1. • Turn clockwise to set the GMT hand. • Turn counterclockwise to change the date.
NH70. Automatic skeleton movement
Start and winding: • Turn the crown clockwise 20 to 30 timer • The movement also charges when you wear the watch.
Set the time: • Pull the crown to position 2. • Turn to set the time. • Push the crown all the way in to start the watch.
VK63. Quartz hybrid with chronograph
Start: • No winding needed.
Set the time: • Pull the crown to position 2. • Turn to set the time.
Use the chronograph: • Press the upper button at 2 o’clock to start or stop. • Press the lower button at 4 o’clock to reset after stopping.
